PLANET WNAP-1260 - Manual (Page 96)

User’s Manual of WNAP-1260
-88-
Figure 8-25
Step 2 Click Add to add a wireless device to the wireless access control list. The Wireless Card
Access Setup page is displayed.
Figure 8-26
Step 3 If the computer you want appears in the Available Wireless Cards list, you can select the
radio button of that computer to obtain its MAC address. Otherwise, you can manually enter
a name and MAC address of the computer to be authorized. Generally, the MAC address is
labeled on the bottom of the wireless device.
Step 4 Click Add to add this wireless device to the wireless card access list. The page jumps to the
list page.
Step 5 Select Turn Access Control On. If selected, you can restrict PCs’ access to the wireless
network, only allowing specified PCs to access your network according to their MAC
addresses.
Step 6 Click Apply to save your Wireless Card Access List settings.
Now, only devices on this list can wirelessly connect to the WNAP-1260 router.