PLANET WNAP-1260 User Manual
Page 70
Advertising
User’s Manual of WNAP-1260
-62-
Step 3 After WPS connection is established, the following page is displayed, indicating that the WPS
connection is completed.
Figure 7-20
PIN mode
Step 4 Select PIN, enter the PIN code of the network adapter (refer to the client of the network
adapter), and click Start PIN to start WPS connection.
Figure 7-21
Step 5 Click the PIN button on the network adapter within 2 minutes to start WPS connection.
Step 6 After WPS connection is established, the following page is displayed, indicating that the WPS
connection is completed.
Advertising