PLANET WNAP-1260 - Manual (Page 128)

User’s Manual of WNAP-1260
-120-

Erase
Under some circumstances (for example, if you move the router to a different network or if you have
forgotten the password) you might want to erase the configuration and restore the factory default
settings.
Click Erase to restore the factory default settings of the router. This operation has the same effect as
pressing the Reset button on the side panel for 3-6 seconds.
9.8.2. Reboot Device
Choose Management Function > Reboot Device and the Reboot Device page is displayed.
Figure 9-17
Click Reboot to reboot the router. After the router is rebooted, the system jumps to the login page.
9.8.3. Set Password
Choose Management Function > Set Password and the Set Password page is displayed.
Figure 9-18
In this page, you can change the password of the administrator and set the page timeout time.
For security, it is strongly recommended to change the default password of the
administrator. If you forget the password, you can restore the router to the default settings.
The default password is admin.