Removal – Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual
Page 109
Studio Display
073-00335-A | 109
© 2022 Apple Inc. All rights reserved.
Removal
1. Press the power cord
removal tool against the
back of the stand. Create
just enough clearance
between the tool and
stand. Then wrap the power
cord around the tool twice.
2. Hold the cord and the power cord removal tool with the same hand. Ensure that the cord is aligned
with the port. Use your other hand to hold the stand for stability.
Power Cord | Removal
Important
If a support wedge is inserted between the housing and the stand, remove it.
Important
Ensure that the display is
tilted completely downward.
Caution
Ensure that the power cord has a direct line for removal to avoid damaging the pins.
Important
For the VESA mount adapter, lay the housing flat on the table. Hold down the housing for stability.