Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 82)

Studio Display
073-00335-A | 82 © 2022 Apple Inc. All rights reserved.
1. Install the 4 mm alignment
pin in the upper left screw
hole in the left side of the
housing (1). Then install the
3 mm alignment pin in the
upper right screw hole (2).
Reassembly
Power Supply Boards | Reassembly
2. Slide the end of the power
cord port cable into the
connector on the back
of the PFC power supply
board.