Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 30)

Studio Display
073-00335-A | 30 © 2022 Apple Inc. All rights reserved.
Display (Stand) | Reassembly
11. Place the two large foam
blocks on the table with the
lines in the blocks running
vertical as shown. Place
the entire unit on top of the
foam blocks with the display
faceup. Remove the support
wedge. Then align the
display with the housing.
12. Separate the display just
enough to remove the
release liner from the
bottom edge of the display.
Repeat the motion along
the perimeter of the display
until the release liners are
removed from the left, right,
and top edges.