Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 120)

Studio Display
073-00335-A | 120 © 2022 Apple Inc. All rights reserved.
Reinstall the following part to complete reassembly:
10. Keep the 20IP bit in the
2.5–25 Nm adjustable
torque wrench. Set the
torque value to 6.4 Nm.
Use the adjustable torque
wrench and 20IP bit to fully
reinstall the six 20IP screws
in the order shown.
Tilt-Adjustable Stand | Reassembly
Don’t tighten the middle
screw. It was set to
the correct torque in a
previous step.
Caution
• Display (stand)