Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 95)

Studio Display
073-00335-A | 95 © 2022 Apple Inc. All rights reserved.
Cables | Reassembly
Reassembly
1. Position the left fan flex
cable in the housing as
shown.
2. Slide the end of the left fan
flex cable into the connector
on the logic board. Use the
black stick to flip down the
locking lever. Then press the
polyester film tab to adhere
it to the end of the flex
cable.
3. Run the flat end of the black
stick along the length of the
left fan flex cable to adhere
it to the housing.
4. Follow the reassembly steps to reinstall the left fan .
5. Position the microphone
flex cable in the housing as
shown.
6. Slide one end of the
microphone flex cable
into the connector on the
microphone. Ensure that the
flex cable is fully inserted.
Then press the polyester
film tab to adhere it to the
end of the flex cable.
7. Slide the other end of the
microphone flex cable into
the connector on the logic
board. Ensure that the cable
is fully inserted. Then press
the polyester film tab to
adhere it to the end of the
flex cable.
8. Run the flat end of the black stick along the length of the flex cable to adhere it to the housing.