Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 127)

Studio Display
073-00335-A | 127 © 2022 Apple Inc. All rights reserved.
Reinstall the following part to complete reassembly:
10. Keep the 20IP bit in the
2.5–25 Nm adjustable
torque wrench. Set the
torque value to 6.4 Nm.
Use the adjustable torque
wrench and 20IP bit to
fully reinstall the four
20IP screws in the order
shown.
Tilt- and Height-Adjustable Stand | Reassembly
Do not tighten the far
right screw. It was set to
the correct torque in a
previous step.
Caution
• Display (stand)