Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 24)

Studio Display
073-00335-A | 24 © 2022 Apple Inc. All rights reserved.
12. Set the display on the
display support stand.
13. Use ESD-safe tweezers to
peel the display adhesive
from the back of the display
edges as shown.
Display (Stand) I Removal
• To prevent damage to the polyester film on the display, don’t peel adhesive residue from the
corners of the display.
• Don’t use ethanol wipes or IPA wipes on the display. Ethanol or isopropyl alcohol may damage
the polyester film.
Caution
10. Pull the tab to flip up the
locking bar (1) on the
camera flex cable. Then
slide the end of the flex
cable out of the
connector (2).
11. Gently wiggle the ends of
the display backlight cables
out of the connectors (3).
If you don’t have a display
support stand, lay the
display facedown on a
clean, soft towel. To avoid
damage to the display,
ensure that the flex cables
don’t touch the towel.
Important