Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 32)

Studio Display
073-00335-A | 32 © 2022 Apple Inc. All rights reserved.
Display (Stand) | Reassembly
15. Use both hands to press the
edge of the display and help
set the adhesive. Move your
hands along the edge of the
display, pressing at each
location.
16. Place the display in the
microfoam bag. Then place
it flat on a clean table with
the display side facedown.
Wait 30 minutes for the
adhesive to attach to both
the display and the housing.
Don’t drag the display on
the table.
Caution
• If you reinstalled the existing display or logic board, the repair is complete.
• If you replaced the display or logic board, complete steps 18 through 20. Ensure that you have
a Mac with Apple Service Utility installed and a USB-C charge cable before you continue.
Important
17. Remove the display from the microfoam bag and stand it upright.