Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 117)

Studio Display
073-00335-A | 117 © 2022 Apple Inc. All rights reserved.
3. Use the alignment pins to
position the display onto the
stand.
4. Insert the 20IP bit into
the 2.5–25 Nm adjustable
torque wrench. Use the
adjustable torque wrench
and 20IP bit to partially
reinstall the middle 20IP
screw (452-06710) and
the four outer 20IP screws
(452-06708) in the order
shown.
Tilt-Adjustable Stand | Reassembly