Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 112)

Studio Display
073-00335-A | 112 © 2022 Apple Inc. All rights reserved.
Tilt-Adjustable Stand
• Display (stand)
Remove the following part
before you begin:
• Adjustable torque wrench
(2.5–25 Nm)
• Alignment pins for stand
and VESA mount adapter
• Flathead screwdriver
• Support wedge for
tilt-adjustable stand
• Torx Plus 20IP 70 mm bit
Tools
Tilt-Adjustable Stand| Before You Begin
Before You Begin
Danger
Ensure that the power cord is not plugged into an electrical outlet.
Caution
Some images show the power cord removed from the display, but during this procedure the power
cord should remain connected to the display.