Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 29)

Studio Display
073-00335-A | 29 © 2022 Apple Inc. All rights reserved.
Display (Stand) | Reassembly
6. Slide the ends of the display
backlight cables (1) into the
connectors.
10. Lift the display and hang it
on the two hangers near the
top of the housing.
7. Slide the end of the
camera flex cable into the
connector (2). Then flip
down the locking bar on
the flex cable (3).
8. Slide the end of the
DisplayPort power cable into
the connector (1).
9. Slide the end of the
DisplayPort signal flex cable
into the connector (2). Then
flip down the locking bar on
the flex cable (3).