Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 75)

Studio Display
073-00335-A | 75 © 2022 Apple Inc. All rights reserved.
3. If you’re replacing the
USB-C boards, peel the
polyester film tape from the
adhesive backing. If you’re
reinstalling the existing
USB-C boards, skip to
reassembly step 4.
USB-C Boards | Reassembly
4. Position the polyester film
tape over both USB-C
boards as shown, starting
from the top left corner. Run
the flat end of the black
stick along the length of the
polyester film tape.
Position the polyester film
tape so that the protective
strip is in the bottom left
corner. Use the black stick
to adhere the polyester
film tape behind the right
speaker cable.
Important