Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 43)

Studio Display
073-00335-A | 43 © 2022 Apple Inc. All rights reserved.
Display (VESA mount adapter) | Reassembly
6. Lift the display assembly up
and rest it on the support
lift wedge and support tilt
wedge.
7. Slide the ends of the display
backlight cables (1) into the
connectors.
8. Slide the end of the
camera flex cable into the
connector (2). Then flip
down the locking bar on the
flex cable (3).
9. Slide the end of the
DisplayPort power cable
into the connector (1).
10. Slide the end of the
DisplayPort signal flex cable
into the connector (2). Then
flip down the locking bar on
the flex cable (3).