Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 86)

Studio Display
073-00335-A | 86 © 2022 Apple Inc. All rights reserved.
Power Supply Boards | Reassembly
19. Use the adjustable torque
driver and Torx T6 bit to
fully reinstall the two
T6 screws.
17. Position the power supply
bus bar on the power supply
boards. Then use the T6
screwdriver to partially
reinstall the two T6 screws
(923-07141) into the power
supply bus bar.
18. Insert the Torx T6 bit into
the 10–34 Ncm adjustable
torque driver. Set the torque
value to 20.5 Ncm.
Ensure that the notches
on the bus bar aligns with
the openings in the power
supply boards.
Important