Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 124)

Studio Display
073-00335-A | 124 © 2022 Apple Inc. All rights reserved.
Reassembly
1. Install the two alignment
pins for stand and VESA
mount adapter into the
stand.
2. Use the alignment pins to
position the display onto the
stand.
• If you’re installing a replacement Tilt- and height-adjustable stand, use the screws included with the
replacement stand.
• If you’re swapping the removed stand for a Tilt-adjustable stand, follow the steps in the Tilt-
adjustable stand reassembly procedure.
• If you’re swapping the removed stand for a VESA mount adapter, follow the steps in the VESA
mount adapter reassembly procedure.
• If you’re installing a replacement tilt- and height-adjustable stand, use the screws included
with the replacement stand.
• To replace the removed stand with a tilt-adjustable stand, follow the reassembly steps in
Tilt-Adjustable Stand .
• To replace the removed stand with a VESA mount adapter, follow the reassembly steps in
VESA Mount Adapter .
Important
Tilt- and Height-Adjustable Stand | Reassembly