Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) - Manual (Page 118)

Studio Display
073-00335-A | 118 © 2022 Apple Inc. All rights reserved.
5. Keep the 20IP bit in the 2.5–25 Nm adjustable torque wrench. Set the torque value to 3.5 Nm.
6. Use the adjustable torque
wrench and 20IP bit to fully
reinstall the middle 20IP
screw to 3.5 Nm.
Tilt-Adjustable Stand | Reassembly
7. Use the adjustable torque
wrench and 20IP bit to
partially reinstall the
remaining four 20IP screws
to 3.5 Nm in the order
shown.