Apple 27" Studio Display (Nano-Texture Glass, Tilt Adjustable Stand) User Manual
Page 44
Advertising
Studio Display
073-00335-A | 44
© 2022 Apple Inc. All rights reserved.
12. Place the two support foam
rest blocks on the table with
the lines in the blocks running
vertical as shown. Place the
housing on the foam blocks
with the display side faceup.
13. Separate the display just
enough to remove the release
liner from the bottom edge of
the display. Repeat the motion
along the perimeter of the
display until the release liners
are removed from the left, right,
and top edges.
Display (VESA mount adapter) | Reassembly
11. Place the display in the housing by aligning the edges.
Advertising