Plustek Opticpro A320E Flatbed Scanner User Manual

Page 115

Advertising

Scanner Buttons Guide

Command Line

Enter the command line and add %1 at the end of the command line to perform a
specific task if you have such information for the selected application program. It
is recommended that you leave this field blank if you will not use or are unsure of
the command line.

2.8.2

Save Setup dialog box (for Scan Button Settings)

Within the Button Configuration window click the

Scan

icon on the left pane and

then click

in the right pane, which opens this dialog box.

The items and parameters available in the window are explained as follows:

Saving Folder

The scanned documents or images are saved to the folder displayed here.

To select or modify the saving folder, click

to open a dialog box where you may

browse your disk drives to select a desired saving folder. (

Open Folder After

Scanning

: Tick this check box if you want the program to automatically open the

saving folder after scanning.) You can also directly enter the folder name in this
field to create a new folder. This newly added saving folder will be added to the
drop-down menu. Next time when you want to use this folder again, you may
simply click to select it from this drop-down menu.

File Name

You are allowed to name the saved files in two ways:

using the "Date and Time" format; or

using customized prefix and numbering scheme.

You can see the file naming example on screen--near the bottom of this dialog box-
-immediately after you make any adjustments. The file name extension is

Advertising