Plustek Opticpro A320E Flatbed Scanner - Manual (Page 140)

Scanner Utility for ADF scanner 6
All rights are reserved.
Alternatively you may click Default to restore the default settings. To turn on the
lamp again, simply perform any scanning task.
6 Standby Mode (This function may or may not be available
depending on the scanner model you purchase)
To save power consumption, the scanner will enter the standby mode after it is idle
for a while.
You may disable the standby mode or define an idle time for the
scanner to automatically enter the standby mode .
1. Right click the icon on the Windows system tray and select Scanner
Utility from the menu that pops up.
2. In the Standby Mode section of the Scanner Utility window that opens, click
the button of your option:
a. To disable the Standby Mode : Click the button before Disable Standby
Mode .
b. To automatically enter the Standby Mode ( Sleep ) : Click the button before
Sleep and then click the up or down arrows to set a default time for the
scanner to automatically enter the Standby Mode .
3. Click on OK button to save settings and exit.
· To completely shut down the scanner, press the power switch on the side of
the scanner.
· If the scanner will not be used for a long period of time, shut down the scanner
and then disconnect the power cable from the power outlet.