Plustek Opticpro A320E Flatbed Scanner User Manual
Page 179
Introduction
7
All rights are reserved.
b. To automatically
enter the Standby Mode (
Sleep
)
: Click the button before
Sleep
and then click the up or down arrows to set a default time for the
scanner
to automatically
enter the Standby Mode
.
c. To automatically
enter the Standby Mode (
Hibernate
)
: Click the button
before
Hibernate
and then click the up or down arrows to set a default
time for the
scanner
to automatically
enter the Standby Mode
. (This
function may or may not be available depending on the scanner model you
purchase.)
3.
Click on
OK
button to save settings and exit.
·
To completely shut down the scanner, press the power switch on the side of
the scanner.
·
If the scanner will not be used for a long period of time, shut down the scanner
and then disconnect the power cable from the power outlet.
Alternatively you may click
Default
to restore the default settings. You may press
any scanner button to wake up the scanner from power saving
.
1.3
Button Functions Overview
Each button on the scanner's panel corresponds to an on-screen scanning button
in MacAction program. You are allowed to customize all on-screen scanning
buttons as any of the available scanning functions (OCR, File, Scan, Copy, E-Mail,
PDF, FTP).
The following button functions are available:
·
OCR
-- Scans text documents directly to a text editor or viewer, thus saving