Plustek Opticpro A320E Flatbed Scanner - Manual (Page 139)

Power Save (This function may or may not be available depending on the scanner model you purchase) 5
All rights are reserved.
· To completely shut down the scanner, press the power switch on the side of
the scanner.
· If the scanner will not be used for a long period of time, shut down the scanner
and then disconnect the power cable from the power outlet.
Alternatively you may click Default to restore the default settings. To turn on the
lamp again, simply perform any scanning task.
5 Lamp Control (This function may or may not be available
depending on the scanner model you purchase)
You may opt to keep the scanner lamp always on or define an idle time for the
scanning lamp to automatically turn itself off.
1. Right click the icon on the Windows system tray and select Scanner
Utility from the menu that pops up.
2. In the Lamp Control section of the Scanner Utility window that opens, click
the button of your option:
a. To set the lamp being always illuminated: Click the button before Keep
lamp always on .
b. To automatically turn the lamp off: Click the button before Sleep and then
click the up or down arrows to set a default time for the lamp to
automatically turn off after a scan.
3. Click on OK button to save settings and exit.