Plustek Opticpro A320E Flatbed Scanner - Manual (Page 41)

TWAIN Help 6
All rights are reserved.
To use an existing profile
1. Place the document on the scanner glass.
2. Select a scan profile from the drop-down list of
Profile . Scan settings
defined under this profile are loaded and displayed on the TWAIN interface.
3. Click the Scan button.
4. The image(s) will be scanned with the preconfigured settings. No need to
spend extra time in configuring the scan settings.
To edit an existing profile
1. Place the document on the scanner glass.
2.
From the drop-down list of Profile , select the scan profile you want to edit.
3. Configure the settings. Scan an image to make sure the current settings
meet your needs.
4. Enter the original profile name in the white area beside the word Profile .
Note: Do not select this original profile name from the drop-down list of
Profile. Doing so will load the original settings to overwrite what you have
just configured.
5. Click the Save button.
This scan profile is now updated with the new settings.
To Manage Existing Profiles
Clicking the Manage button opens the Profile Management window where
you can delete or rename existing profiles, as well as save existing profiles
as new ones.