Siemens TC63 User Manual
Page 111
TC63 AT Command Set
5.1 AT+CPIN
s
TC63_ATC_V00.490
Page 111 of 501
5/24/05
Confidential / Draft - Do not copy
SIM locks:
These are factory set locks, such as "PF", "PN", "PU", "PP", "PC". An 8-digit unlocking code is required to operate
the mobile with a different SIM card, or to lift the lock. The code can only be obtained from the provider.
Failure to enter the password is subject to the same timing algorithm as the Master Phone Code (see Table
above).
Call barring:
Supported modes are "AO", "OI", "OX", "AI", "IR", "AB", "AG", "AC". If the call barring password is entered incor-
rectly three times, the client will need to contact the service provider to obtain a new one.
Related sections:
"+CME ERROR:
" values are specified at Section
. For further
instructions and examples see
and
.
For a complete list of Star-Hash codes please refer Section