Siemens TC63 - Manual (Page 279)

TC63 AT Command Set
11.7 AT+CGEQMIN
s
TC63_ATC_V00.490 Page 279 of 501 5/24/05
Confidential / Draft - Do not copy
11.7 AT+CGEQMIN 3G Quality of Service Profile (Minimum accept-
able)
Syntax
Command Description
The test command returns values supported as a compound value.
The read command returns the current settings for each defined context.
The write command allows the TE to specify a Quality of Service Profile for the context identified by the (local)
context identification parameter
<cid>
which is checked by the MT against the negotiated profile returned in the
Activate/Modify PDP Context Accept message.
A special form of the write command,
AT+CGEQMIN
=
<cid>
causes the requested profile for context number
<cid>
to become undefined.
AT&F
and
ATZ
will undefine the QoS profiles of every context which is not active or not online.
Test Command
AT+CGEQMIN=?
Response(s)
+CGEQMIN: <PDP_type>
, (list of supported
<Traffic class>
s), (list of supported
<Maximum bitrate
UL>
s), (list of supported
<Maximum bitrate DL>
s), (list of supported
<Guaranteed bitrate UL>
s),
(list of supported
<Guaranteed bitrate DL>
s), (list of supported
<Delivery order>
s), (list of
supported
<Maximum SDU size>
s), (list of supported
<SDU error ratio>
s), (list of supported
<Residual bit error ratio>
s), (list of supported
<Delivery of erroneous SDUs>
s), (list of
supported
<Transfer delay>
s), (list of supported
<Traffic handling priority>
s)
OK
Read Command
AT+CGEQMIN?
Response(s)
[+CGEQMIN:
<cid>
, (list of supported
<Traffic class>
s), (list of supported
<Maximum bitrate
UL>
s), (list of supported
<Maximum bitrate DL>
s), (list of supported
<Guaranteed bitrate UL>
s),
(list of supported
<Guaranteed bitrate DL>
s), (list of supported
<Delivery order>
s), (list of
supported
<Maximum SDU size>
s), (list of supported
<SDU error ratio>
s), (list of supported
<Residual bit error ratio>
s), (list of supported
<Delivery of erroneous SDUs>
s), (list of
supported
<Transfer delay>
s), (list of supported
<Traffic handling priority>
s)]
[+CGEQMIN: ...]
Write Command
AT+CGEQMIN=
[
<cid>
[,
<Traffic class>
[,
<Maximum bitrate UL>
[,
<Maximum bitrate DL>
[,
<Guaranteed bitrate UL>
[,
<Guaranteed bitrate DL>
[,
<Delivery order>
[,
<Maximum SDU
size>
[,
<SDU error ratio>
[,
<Residual bit error ratio>
[,
<Delivery of erroneous
SDUs>
[,
<Transfer delay>
[,
<Traffic handling priority>
]]]]]]]]]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
3GPP TS 27.007 % % % % % % % ! % !