Siemens TC63 - Manual (Page 318)

TC63 AT Command Set
12.8 AT+FTS
s
TC63_ATC_V00.490 Page 318 of 501 5/24/05
Confidential / Draft - Do not copy
12.8 AT+FTS Stop Transmission and Wait
Syntax
Command Description
This command causes the TA to terminate a transmission and wait for
<time>
10 millisecond intervals before
responding with the OK result code to the DTE.
Parameter Description
no. of 10 millisecond intervals
0...85
Note
• Used for Fax Class 1 only
Write Command
AT+FTS= <time>
Response(s)
An ERROR response code results if this command is issued while the modem is on-
hook.
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 ! % ! % % ! ! ! ! !
<time>
(num)