Calling number, Class, Mode – Siemens TC63 User Manual

Page 219: Is no, 2 an, Ccwa, Status, Tc63 at command set

Advertising
background image

TC63 AT Command Set

9.7 AT+CCWA

s

TC63_ATC_V00.490

Page 219 of 501

5/24/05

Confidential / Draft - Do not copy

Parameter Description

Switch URCs "

+CCWA

" and "

^SCWA

" for call waiting on/off

0

Disable display of URCs "

+CCWA

" and "

^SCWA

"

1

Enable display of URCs "

+CCWA

" and "

^SCWA

"

Network operation to be performed for Supplementary service call waiting
0

Disable call waiting (disable service)

1

Enable call waiting (enable service)

2

Query status of call waiting (query service status)

Integer or sum of integers each representing a class of information, i.e. a bearer service, telecommunication ser-

vice or bearer service group as defined in "GSM 02.04".

In the write command, parameter

<class>

specifies the class of the active call during which an incoming call

of any class is to be regarded as a waiting call.

In URC "

+CCWA

:

<calling number>

,

<type of number>

,

<class>

, ,

<CLI validity>

", parameter

<class>

specifies the class of the waiting call.

1

Voice

2

Data

<class> 2 (data) comprises all those <class> values between 16 and 128, that

are supported both by the network and the MS. This means, a setting made for

<class> 2 applies to all remaining data classes (if supported). In addition, you

can assign a different setting to a specific class. For example, you can activate

call waiting for all data classes, but deactivate it for a specific data class.

4

Fax

[7]

Voice, data and fax (1+2+4)

8

SMS

16

Data circuit sync

32

Data circuit async

64

Dedicated packet access

128

Dedicated PAD access

1...[7]...255

Combination of some of the above classes. For example, the default setting 7

represents the sum of the integers 1, 2 and 4 (CF for voice, data and fax). The

value 255 covers all classes. If parameter "class"is omitted, the default value 7

is used.

0

Call waiting service is not active

1

Call waiting service is active

Phone number of waiting caller in the format specified by parameter

<type of number>

.

<n>

(num)

<mode>

(num)

<class>

(num)

<status>

(num)

<calling number>

(str)

Advertising