Siemens TC63 - Manual (Page 76)

TC63 AT Command Set
3.3 AT^SIND
s
TC63_ATC_V00.490 Page 76 of 501 5/24/05
Confidential / Draft - Do not copy
Phone number, for further details see
AT+CPBR
.
Address type, for further details see
AT+CPBR
.
145 Dialing string
<adnNumber>
includes international access code character '+'.
209 Dialing string
<adnNumber>
contains printable non-alphabetic non-digit char-
acters saved with the number string.
129 otherwise
Text assigned to a phone number. For further details see
AT+CPBR
.
If delivered by the network: Number of new voice messages sent as part of the Voice Message Waiting Indicator.
Refer to
<indDescr>
.
Operator in format which depends on the type associated to the operator name. Refer to
<indValue>
.
Service Provider Name according to the status settings (SIM Service No. 17) in the SIM Service Table (SST) of
the SIM.
Universal Time delivered as part of the "nitz" Indicator. Refer to
<indDescr>
.
Time Zone delivered as part of the "nitz" Indicator. Refer to
<indDescr>
.
Adjustment for Daylight Saving Time as part of the "nitz" Indicator. Refer to
<indDescr>
.
Example
Activation and use of indicator "audio":
<adnNumber>
(str)
<adnType>
(num)
<adnText>
(str)
<vmCounter>
<eonsOperator>
<servProvider>
(str)
<nitzUT>
<nitzTZ>
<nitzDST>
AT^SIND="audio",1
You register the indicator "audio".
^SIND: audio,1,0
OK
AT+CMER=2,,,2
You activate the Indicator Event Report with
AT+CMER
.
OK
A set of all registered URCs is presented. (Please note that the example
includes the indicators registered due to the power-up default settings
of
AT+CIND
.)
+CIEV: battchg,5
+CIEV: signal,99
+CIEV: service,1
+CIEV: sounder,0
+CIEV: message,1