Siemens TC63 - Manual (Page 224)

TC63 AT Command Set
9.9 AT+CLIP
s
TC63_ATC_V00.490 Page 224 of 501 5/24/05
Confidential / Draft - Do not copy
9.9 AT+CLIP Calling line identification presentation
This command refers to the GSM supplementary service CLIP (Calling Line Identification Presentation) that
enables a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile ter-
minated call.
Syntax
Unsolicited Result Codes
URC 1
Voice call response format:
+CLIP: <number> , <type> , , [, <alpha> ][, <CLI validity> ]
URC 2
Data/FAX call response format:
+CLIP: <number> , <type>
When CLIP is enabled at the TE (and is permitted by the calling subscriber), an unsolicited result code is
returned after every RING (or +CRING:
<type>
) at a mobile terminating call.
Command Description
Test command returns values supported by the TA as a compound value.
Read command gives the status of
<n>
, and also triggers an interrogation of the provision status of the CLIP
service according GSM 02.81 (given in
<m>
).
If no SIM card is available or SIM-Pin isn't entered, the command response is "ERROR".
Write command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the
supplementary service CLIP in the network.
Test Command
AT+CLIP=?
Response(s)
+CLIP:
(list of supported
<n>
s)
OK
Read Command
AT+CLIP?
Response(s)
+CLIP: <n>
,
<m>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CLIP= <n>
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07, GSM 02.81 § % % % % % % ! ! !