Siemens TC63 - Manual (Page 401)

TC63 AT Command Set
17.6 AT^SDLD
s
TC63_ATC_V00.490 Page 401 of 501 5/24/05
Confidential / Draft - Do not copy
17.6 AT^SDLD Delete the 'last number redial' memory
AT^SDLD
deletes all numbers stored in the "LD" memory.
Syntax
Note
•
AT^SDLD
can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the initial read process is in progress, an attempt to use any of the phone-
book commands will result in "+CME Error: 14" (SIM busy).
We recommend to take advantage of the "
^SSIM READY
" URC. If enabled with
AT^SSET
, this URC notifies
the user when SIM data are accessible after SIM PIN authentication. The URC will be delivered once the ME
has completed reading data from the SIM card.
Test Command
AT^SDLD=?
Response(s)
OK
Exec Command
AT^SDLD
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS % % % % % % % ! % !