Siemens TC63 - Manual (Page 414)

TC63 AT Command Set
18.5 AT+CMUT
s
TC63_ATC_V00.490 Page 414 of 501 5/24/05
Confidential / Draft - Do not copy
18.5 AT+CMUT Mute control
The
AT+CMUT
command mutes the microphone input. The command can be used in all audio modes (1 to 6) and
during a voice call only. See
AT^SNFS
for more details on the various audio modes. As alternative, you can use
the
AT^SNFM
command.
During an active call, users should be aware that when they switch back and forth between different audio modes
(for example handsfree on/off) the value of
<mute>
does not change, i.e. the microphone mode is retained until
explicitly changed.
Syntax
Parameter Description
0 (P) Mute off
1 Mute on
Test Command
AT+CMUT=?
Response(s)
+CMUT:
(list of supported
<mute>
s)
OK
Read Command
AT+CMUT?
Response(s)
+CMUT: <mute>
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CMUT= <mute>
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 ! % % % % % % ! % !
<mute>
(num)