Siemens TC63 - Manual (Page 237)

TC63 AT Command Set
10.1 AT^SICS
s
TC63_ATC_V00.490 Page 237 of 501 5/24/05
Confidential / Draft - Do not copy
10.1 AT^SICS Internet Connection Setup Profile
AT^SICS
serves to create and edit Internet connection profiles. A connection profile can be assigned to one or
more service profiles defined with
AT^SISS
, and thus, determines which type of connection is to be established
when opening a service profile with
AT^SISO
.
The
AT^SICS
read command requests the current settings of all Internet connection profiles. One line is issued
for every possible parameter of a given
<conParmTag>
"conType" value.
The
AT^SICS
write command specifies all parameters of a connection profile identified by
<conProfileId>
.
At first the type of Internet connection needs to be selected via
<conParmTag>
value "conType". This deter-
mines the applicability of all other
<conParmTag>
values related to this "conType" and automatically sets their
defaults. An exception is the
<conParmValue-alphabet>
which can be set before or after selecting "con-
Type". To change the settings the write command needs to be executed for each single
<conParmTag>
.
All profile parameters set with
AT^SICS
are volatile. Therefore, the best practice is to use scripts and let the host
application handle the required AT commands.
Table 10.1: Applicability of AT^SICS <conParmTag> values
Syntax
<conParmTag>
value CSD GPRS0
"conType" mandatory mandatory
"user" optional optional
"passwd" optional optional
"apn" ø mandatory
"inactTO" optional optional
"calledNum" mandatory ø
"dataRate" mandatory ø
"dataType" mandatory ø
"authMode" mandatory mandatory
"dns1" optional optional
"dns2" optional optional
"alphabet" optional optional
Test Command
AT^SICS=?
Response(s)
OK
Read Command
AT^SICS?
Response(s)
^SICS: <conProfileId>
,
<conParmTag>
,
<conParmValue>
OK
Write Command
AT^SICS= <conProfileId>
,
<conParmTag>
,
<conParmValue>
Response(s)
OK