Siemens TC63 - Manual (Page 390)

TC63 AT Command Set
16.4 AT^SSTR
s
TC63_ATC_V00.490 Page 390 of 501 5/24/05
Confidential / Draft - Do not copy
16.4 AT^SSTR SAT Response
The TA is expected to acknowledge the
AT^SSTGI
response with
AT^SSTR
to confirm that the Proactive Com-
mand has been executed.
AT^SSTR
will also provide any user information, e.g. a selected menu item.
Syntax
Parameter Description
TC63 Remote-SAT interface states
0
RESET
1 OFF
2 IDLE
3 PAC
4 WAIT
Number related to Proactive Command or event type according to GSM 11.14 [24] .
Command status return regarding the type of action that has taken place, e.g. action performed by the user.
Values are in accordance with GSM 11.14 [24] .
Response number entered by user
Response string entered by user
Test Command
AT^SSTR=?
Response(s)
^SSTR:
(list of supported
<state>
s), (list of supported
<cmdType>
s)
OK
Read Command
AT^SSTR?
Response(s)
^SSTR: <state>
,
<cmdType>
OK
Write Command
AT^SSTR= <cmdType>
,
<status>
[,
<inputNumber>
][,
<inputString>
]
Response(s)
OK
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS ! % % % % % % ! % !
<state>
(num)
<cmdType>
(num)
<status>
(num)
<inputNumber>
(num)
<inputString>
(str)