Siemens TC63 - Manual (Page 205)

TC63 AT Command Set
8.15 AT^SPLR
s
TC63_ATC_V00.490 Page 205 of 501 5/24/05
Confidential / Draft - Do not copy
8.15 AT^SPLR Read entry from the preferred operators list
The
AT^SPLR
write command returns used entries from the SIM list of preferred operators with
<indexa>
between
<index1>
and
<index2>
. If
<index2>
is not given, only entry at
<index1>
is returned. The test com-
mand returns the whole index range supported by the SIM.
See also GSM 07.07: AT+CPOL
Syntax
Parameter Description
Location number to start reading from
Location number where to stop reading
Index range supported by the SIM card (between
<index1>
and
<index2>
)
Operator in numeric form; GSM location area identification number
Test Command
AT^SPLR=?
Response(s)
^SPLR:
(list of supported)
<indexa>
s
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SPLR= <index1>
[,
<index2>
]
Response(s)
^SPLR: <index1><oper>
^SPLR: <index2><oper>
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS % % % % % % % ! % !
<index1>
(num)
<index2>
(num)
<indexa>
(num)
<oper>
(str)