Siemens TC63 - Manual (Page 321)

TC63 AT Command Set
13.1 SMS parameters
s
TC63_ATC_V00.490 Page 321 of 501 5/24/05
Confidential / Draft - Do not copy
Received messages will be placed in this memory storage if routing to TE is not set. See command
AT+CNMI
with parameter
<mt>
=2.
“SM“ SIM message storage
“MT“ (D) Sum of "SM" and "ME" storages
Message Identifier
GSM 03.41 CBM Message Identifier in integer format
Message Number
GSM 03.40 TP-Message-Number in integer format
Message Reference
GSM 03.40 TP-Message-Reference in integer format
Originating Address
GSM 03.40 TP-Originating-Address Address-Value field in string format; BCD numbers (or GSM default alpha-
bet characters) are converted into characters; type of address given by
<tooa>
Page Parameter
GSM 03.41 CBM Page Parameter bits 4-7 in integer format
Page Parameter
GSM 03.41 CBM Page Parameter bits 0-3 in integer format
In the case of SMS: GSM 04.11 SC address followed by GSM 03.40 TPDU in hexadecimal format: ME/TA con-
verts each octet of TP data unit into hexadecimal numbers containing two IRA characters (e.g. octet with integer
value 42 is presented to TE as two characters 2A (IRA 50 and 65)). In the case of CBS:
<ra>
GSM 03.40 TP-
Recipient-Address Ad-dress-Value field in string format; BCD numbers (or GSM default alphabet characters)
are converted into characters; type of address given by
<tora>
Recipient Address
GSM 03.40 TP-Recipient-Address Address-Value field in string format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently selected TE character set (refer to command
AT+CSCS
.); type of address given by
<tora>
<mem3>
(str)
<mid>
(num)
<mn>
(num)
<mr>
(num)
<oa>
(num)(+CSCS)
<page>
(num)
<pages>
(num)
<pdu>
(num)
<ra>
(num)(+CSCS)