Siemens TC63 - Manual (Page 315)

TC63 AT Command Set
12.5 AT+FRS
s
TC63_ATC_V00.490 Page 315 of 501 5/24/05
Confidential / Draft - Do not copy
12.5 AT+FRS Receive Silence
<time>
=n causes the TA to report an OK result code to the TE after
<time>
10 millisecond intervals of silence
have been detected on the line.
The command is aborted if any character is received by the DTE. The modem discards the aborting character
and issues an OK result code. An ERROR response code results if this command is issued while the mode is
on-hook.
Syntax
Parameter Description
Number of 10 millisecond intervals
0...255
Note
• Used for Fax Class 1 only
Write Command
AT+FRS= <time>
Response(s)
OK
If error related to ME functionality
ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
TIA/EIA-578 ! % ! % % ! ! ! ! !
<time>
(num)