Siemens TC63 - Manual (Page 337)

TC63 AT Command Set
13.11 AT+CNMI
s
TC63_ATC_V00.490 Page 337 of 501 5/24/05
Confidential / Draft - Do not copy
13.11 AT+CNMI New SMS message indications
Syntax
Unsolicited Result Codes
URC 1
<mt>
=1:
+CMTI: <mem3> , <index>
Indicates that new message has been received
URC 2
<mt>
=2 (PDU mode enabled):
+CMT: <length> <CR><LF> <pdu>
Indicates that new message has been received
URC 3
<mt>
=2 (text mode enabled):
+CMT: <oa> , <scts> [, <tooa> , <fo> , <pid> , <dcs> , <sca> , <tosca> ,
<length> ] <CR><LF> <data>
Indicates that new message has been received
URC 4
<bm>
=2 (PDU mode enabled):
+CBM: <length> <CR><LF> <pdu>
Indicates that new cell broadcast message has been received
Test Command
AT+CNMI=?
Response(s)
+CNMI:
(list of supported
<mode>
s), (list of supported
<mt>
s), (list of supported
<bm>
s), (list of supported
<ds>
s), (list of supported
<bfr>
s)
OK
Read Command
AT+CNMI?
Response(s)
+CNMI: <mode>
,
<mt>
,
<bm>
,
<ds>
,
<bfr>
OK
Write Command
AT+CNMI=
[
<mode>
][,
<mt>
][,
<bm>
][,
<ds>
][,
<bfr>
]
Response(s)
OK
ERROR
+CMS ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.05 % % % % % % % ! % !