Siemens TC63 - Manual (Page 17)

TC63 AT Command Set
1.3 Document conventions
s
TC63_ATC_V00.490 Page 17 of 501 5/24/05
Confidential / Draft - Do not copy
1.3.2 Superscript notation for parameters and values
Table 1.1: Symbols used to mark the type of parameters
Table 1.2: Symbols used to indicate the correlations with other commands
Table 1.3: Symbols used to mark different types of default values of parameters
Parameter type Meaning
<param> (num) Parameter value must be numeric type
<param> (str) Parameter value must be string type
Parameter option Meaning
<param> (&W) Parameter value will be stored with
AT&W
<param> (&V) Parameter value will be displayed with
AT&V
<param> (ˆSNFW) Parameter value will be stored with
AT^SNFW
<param> (+CSCS) Parameter value has to be (is) coded according to current setting of
<chset>
(see
AT+CSCS
for details)
Value option Meaning
[x] Default value: if the parameter is omitted, the value 'x' will be assumed
x (&F) Factory default value, will be restored to 'x' with
AT&F
x (P) Powerup default value of a parameter which is not stored at power down
x (D) Delivery default value of a parameter which cannot be restored automatically