Siemens TC63 - Manual (Page 297)

TC63 AT Command Set
11.12 AT+CGREG
s
TC63_ATC_V00.490 Page 297 of 501 5/24/05
Confidential / Draft - Do not copy
0 Not registered, ME is not currently searching an operator to register to. The ME
is in GMM state GMM-NULL or GMM-DEREGISTERED-INITIATED.
The GPRS service is disabled, the ME is allowed to attach to GPRS if
requested by the user.
1 Registered, home network. The ME is in GMM state GMM-REGISTERED or
GMM-ROUTING-AREA-UPDATING-INITIATED INITIATED on the home
PLMN
2 Not registered, but ME is currently trying to attach or searching an operator to
register to. The ME is in GMM state GMM-DEREGISTERED or GMM-REGIS-
TERED-INITIATED. The GPRS service is enabled, but an allowable PLMN is
currently not available. The ME will start a GPRS attach as soon as an allow-
able PLMN is available.
3 Registration denied. The ME is in GMM state GMM-NULL. The GPRS service
is disabled, the ME is not allowed to attach to GPRS if requested by the user.
4 Unknown
5 Registered, roaming. The ME is in GMM state GMM-REGISTERED or GMM-
ROUTING-AREA-UPDATING-INITIATED on a visited PLMN.
Two byte location area code in hexadecimal format.
Two byte cell ID in hexadecimal format.
Note
• When the module is GPRS attached and a PLMN reselection occurs to a non-GPRS network or to a network
where the SIM is not subscribed to for using GPRS, the resulting GMM (GPRS mobility management) state
according to GSM 24.008 is REGISTERED/NO CELL, meaning that the read command will still show
<stat>
=1 or
<stat>
=5.
<stat>
(num)
<lac>
(str)
<ci>
(str)