Siemens TC63 - Manual (Page 225)

TC63 AT Command Set
9.9 AT+CLIP
s
TC63_ATC_V00.490 Page 225 of 501 5/24/05
Confidential / Draft - Do not copy
Parameter Description
[0] (&F) suppress unsolicited result codes
1 display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 unknown
string type phone number of calling address in format specified by
<type>
type of address octet in integer format; 145 when dialling string includes in-ternational access code character
"+", otherwise 129.
string type alphanumeric representation of
<number>
corresponding to the entry found in phonebook; used
character set should be the one selected with command Select TE Character Set
AT+CSCS
0 CLI valid
1 CLI has been withheld by the originator.
2 CLI is not available due to interworking problems or limitations of originating
network.
<number>
shall be an empty string ("") and
<type>
value will not be
significant.
When CLI is not available (
<CLI validity>
=2),
<number>
shall be an empty string ("") and
<type>
value
will not be significant. Nevertheless, TA shall return the recommended value 128 for
<type>
(TON/NPI
unknown in accordance with GSM 04.08 subclause 10.5.4.7).
When CLI has been withheld by the originator, (
<CLI validity>
=1) and the CLIP is provisioned with the
"override category" option (refer GSM 02.81 and GSM 03.81),
<number>
and
<type>
is provided. Otherwise,
TA shall return the same setting for
<number>
and
<type>
as if the CLI was not available.
<n>
(num)(&W)(&V)
<m>
(num)(&V)
<number>
(str)
<type>
(num)
<alpha>
(str)
<CLI validity>
(num)