Siemens TC63 - Manual (Page 214)

TC63 AT Command Set
9.6 AT+CCFC
s
TC63_ATC_V00.490 Page 214 of 501 5/24/05
Confidential / Draft - Do not copy
9.6 AT+CCFC Call forwarding number and conditions control
AT+CCFC
controls the call forwarding supplementary service. Registration, erasure, activation, deactivation and
status query are supported.
Syntax
Parameter Description
Reason for call forwarding
0
unconditional
1 mobile busy
2 no reply
3 not reachable
4 all call forwarding (includes reasons 0, 1, 2 and 3)
5 all conditional call forwarding (includes reasons 1, 2 and 3)
Network operation to be performed for Supplementary service "call forwarding"
0
disable call forwarding (disable service)
1 enable call forwarding (enable service)
2 query status of call forwarding (query service status)
3 register
<number>
and activate call forwarding (register service)
4 erase
<number>
and deactivate call forwarding (erase service)
Test Command
AT+CCFC=?
Response(s)
+CCFC:
(list/range of supported
<reason>
s)
OK
Write Command
AT+CCFC= <reason>
,
<mode>
[,
<number>
[,
<type>
[,
<class>
[,
<time>
]]]]
Response(s)
If
<mode>
is not equal 2 and command successful:
OK
If
<mode>
= 2,
<reason>
is not equal 2 and command successful:
+CCFC: <status>
,
<class>
[,
<number>
,
<type>
]
OK
If
<mode>
= 2,
<reason>
= 2 and command successful:
+CCFC: <status>
,
<class>
[,
<number>
,
<type>
,
<time>
]
OK
If error is related to ME functionality
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07, GSM 02.04, GSM 02.82,
GSM 03.82, GSM 04.82
% % % % % % % ! ! !
<reason>
(num)
<mode>
(num)