Siemens TC63 - Manual (Page 46)

TC63 AT Command Set
2.12 AT+CMEE
s
TC63_ATC_V00.490 Page 46 of 501 5/24/05
Confidential / Draft - Do not copy
2.12 AT+CMEE Mobile Equipment Error Message Format
AT+CMEE
controls the format of the error result codes that indicates errors related to TC63 functionality. Format
can be selected between plain "ERROR" output, error numbers or verbose "+CME ERROR: <err> " and "+CMS
ERROR: <err> " messages.
Possible error result codes are listed in Table 2.4 , General "CME ERROR" Codes (GSM 07.07) , Table 2.6 ,
GPRS related "CME ERROR" Codes (GSM 07.07) and Table 2.8 , SMS related "CMS ERROR" Codes (GSM
07.05) .
In multiplex mode (refer
AT+CMUX
) the setting applies only to the logical channel where selected. The setting on
the other channels may differ.
Syntax
Parameter Description
0 (&F)(D) Disable result code, i.e. only "ERROR" will be displayed.
1 Enable error result code with numeric values.
2 Enable error result code with verbose (string) values.
Example
To obtain enhanced error messages it is recommended to choose
<errMode>
=2.
Test Command
AT+CMEE=?
Response(s)
+CMEE:
(list of supported
<errMode>
s)
OK
Read Command
AT+CMEE?
Response(s)
+CMEE: <errMode>
OK
Write Command
AT+CMEE= <errMode>
Response(s)
OK
ERROR
+CME ERROR: <err>
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 ! % % % % % % ! % !
<errMode>
(num)(&W)(&V)
AT+CMEE=2
OK