Siemens TC63 - Manual (Page 145)

TC63 AT Command Set
7.4 ATD><mem><n>
s
TC63_ATC_V00.490 Page 145 of 501 5/24/05
Confidential / Draft - Do not copy
Notes
• This command may be aborted generally by receiving a character during execution. Abortion is not possible
during some states of connection setup such as handshaking.
• There is no
<mem>
for emergency call ("EN").
• The command is not applicable to data calls. Any attempt to dial a data call number from
<mem>
causes the
result code "NO CARRIER" to appear.
• Parameter
<mgsm>
only if no *# code is within the dialing string.
• See
ATX
for setting result code and call monitoring parameters.
Examples
EXAMPLE 1
To query the location number of the phonebook entry:
TA returns the entries available in the active phonebook.
EXAMPLE 2
To dial a number from the SIM phonebook, for example the number stored to location 15:
EXAMPLE 3
To dial a phone number stored in the last dial memory on the SIM card:
AT+CPBR=1,xx
ATD>SM15;
OK
ATD>LD9;
OK