Siemens TC63 - Manual (Page 296)

TC63 AT Command Set
11.12 AT+CGREG
s
TC63_ATC_V00.490 Page 296 of 501 5/24/05
Confidential / Draft - Do not copy
11.12 AT+CGREG GPRS network registration status
The write command controls the presentation of an unsolicited result code "
+CGREG
:
<stat>
" when
<n>
=1 and
there is a change in the MT's GPRS network registration status, or unsolicited result code "
+CGREG
:
<stat>
,
<lac>
,
<ci>
" when
<n>
=2 and there is a change of the network cell.
The read command returns the status of result code presentation and an integer
<stat>
which shows whether
the network has currently indicated the registration of the MT. Location information elements
<lac>
and
<ci>
are returned only when
<n>
=2 and MT is registered in the network.
Syntax
Unsolicited Result Codes
URC 1
+CGREG: <stat>
Indicates a change in the MT's GPRS network registration status.
URC 2
+CGREG: <stat> , <lac> , <ci>
Indicates a change in the MT's GPRS network registration status a change of the network cell including loca-
tion information.
Parameter Description
0 (P) Disable network registration unsolicited result code
1 Enable network registration unsolicited result code "
+CGREG
:
<stat>
"
2 Enable network registration unsolicited result code "
+CGREG
:
<stat>
,
<lac>
,
<ci>
"
Test Command
AT+CGREG=?
Response(s)
+CGREG:
(list of supported
<n>
s)
OK
Read Command
AT+CGREG?
Response(s)
+CGREG: <n>
,
<stat>
[,
<lac>
,
<ci>
]
OK
Write Command
AT+CGREG=
[
<n>
]
Response(s)
OK
ERROR
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07 % % % % % % % ! % !
<n>
(num)