Siemens TC63 - Manual (Page 127)

TC63 AT Command Set
5.6 AT+CPWD
s
TC63_ATC_V00.490 Page 127 of 501 5/24/05
Confidential / Draft - Do not copy
EXAMPLE 4
To specify a new "PS" lock password, after the old password was disabled (e.g. after three failed attempts to
change the "PS" password): use the master phone code.
CAUTION: THIS TEST SHOULD BE PERFORMED ONLY IF THE CORRECT MASTER PHONE CODE FOR
THE INDIVIDUAL ME USED IS DEFINITELY AVAILABLE! Otherwise the module used will be rendered use-
less until the correct master phone code is entered!:
Alternatively, without giving a new password:
AT+CPWD="PS","12345678","1111"
where 12345678 is the Master Phone Code and
1111 is the new password. You may also use
<new
password>
to restore the former disabled pass-
word.
OK
AT+CPWD="PS","12345678"
(where 12345678 is the Master Phone Code). Deac-
tivates the present phone lock.
OK