Siemens TC63 - Manual (Page 403)

TC63 AT Command Set
17.8 AT^SPBD
s
TC63_ATC_V00.490 Page 403 of 501 5/24/05
Confidential / Draft - Do not copy
17.8 AT^SPBD Purge phonebook memory storage
AT^SPBD
can be used to purge the selected phonebook
<storage>
manually, i.e. all entries stored in the
selected phonebook storage will be deleted. CAUTION! The operation cannot be stopped nor reversed!
The
AT^SPBD
test command returns the list of phonebooks which can be deleted with
AT^SPBD
.
An automatic purge of the phonebooks is performed when the SIM card is removed and replaced with a different
SIM card. This affects the ME based part of the "LD" storage, and storages "MC" and "RC". Storage "ME" is not
affected.
Syntax
Parameter Description
If test command: List of phonebooks which can be deleted by
AT^SPBD
.
If write command: Phonebook to be deleted.
For a detailed description of storages see
AT+CPBS
.
“LD“ Last number dialed phonebook
“MC“ Missed (unanswered received) calls list
“RC“ Received calls list
Note
•
AT^SPBD
can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the initial read process is in progress, an attempt to use any of the phone-
book commands will result in "+CME Error: 14" (SIM busy).
We recommend to take advantage of the "
^SSIM READY
" URC. If enabled with
AT^SSET
, this URC notifies
the user when SIM data are accessible after SIM PIN authentication. The URC will be delivered once the ME
has completed reading data from the SIM card.
Test Command
AT^SPBD=?
Response(s)
^SPBD:
list of supported
<storage>
s
OK
+CME ERROR
Write Command
AT^SPBD= <storage>
Response(s)
OK
+CME ERROR
Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS % % % % % % % ! % !
<storage>
(str)