Siemens TC63 - Manual (Page 332)

TC63 AT Command Set
13.7 AT+CMGS
s
TC63_ATC_V00.490 Page 332 of 501 5/24/05
Confidential / Draft - Do not copy
• At baudrates lower than 19200 it is recommended to use the line termination character only (refer to
<n>
of
ATS3
, default
<CR>
) before entering text or PDU. Use of the line termination character followed by the
response formatting character (see
<n>
of
ATS4
, default
<LF>
) can cause problems.