Sonic Alert Digital Program Controller DCP301 - Manual (Page 5)

iii
CAUTION
Use induced lighting surge preventive device if there is the risk of power
surges caused by lightning.
Failure to do might cause fire or faulty operation.
Before replacing the battery, be sure to turn the power OFF. Failure to do so
might cause electric shock.
Do not touch internal components immediately after turning the power OFF
to replace the battery. Doing so might cause burns.
Do not insert the battery with the polarities (+,-) reversed.
Do not use damaged (broken battery skin, leaking battery fluid) batteries.
Do not throw batteries into fires, or charge, short-circuit, disassemble or
heat batteries.
Store batteries in low-temperature, dry locations.
Failure to observe the above cautions may cause batteries to emit heat or
split, or battery fluid to lead.
Store batteries out of the reach of small children.
Batteries are small and are easy to swallow. If a child swallows a battery,
consult a physician immediately.
Return used batteries to Honeywell sales/service office or your dealer. When
disposing of used batteries at the user site, observe local by laws.
Handling Precautions
After turning the power ON, do not operate the DCP301 for at least 15s
to allow the DCP301 to stabilize.